珠海附近想过夜电话联系


National service hotline
seventeen billion eight hundred and seventy-one million one hundred and fifty thousand and eighteen

Scraper type slag scraper

You only need a phone call, we will provide the most suitable products, so that you spend the least money to achieve the best results

National service hotline
seventeen billion eight hundred and seventy-one million one hundred and fifty thousand and eighteen

Recommended products

Hotline:

seventeen billion eight hundred and seventy-one million one hundred and fifty thousand and eighteen

Email: 2334719176@qq.com

Address: Dengcheng Industrial Park, Dengcheng Avenue, high tech Zone, Xiangyang City, Hubei Province

Zwy-80t wheel scraper slag scraper

  • Hotline: seventeen billion eight hundred and seventy-one million one hundred and fifty thousand and eighteen
  • product details

  • contact us

Main features:

1. The chassis is upgraded from the original 16U steel to the inner 12mm steel plate, which ensures that the chassis has sufficient strength and thrust without deformation when the equipment is used for slag discharging and pushing in large roadway.
2. The boom is formed by welding as a whole. Finally, boring machine is used to bore holes and cast alkanes. It can strengthen the firmness of the big and small arms, prolong the service life of the pin and sleeve, thus avoiding the welding fracture at the welding joint, so as to be durable.
3. When the pressure of the multi-channel valve is upgraded from 15MPa to 20MPa, the multi-channel valve will not leak and get stuck when the pressure is too high. The quality of tubing is greatly improved from domestic brand to Sino Japanese joint venture brand, and the probability of tube burst and tube detachment is greatly reduced.
4. The scraper chain adopts the alternate mode of high and low scraper. The pitch of new type coarse chain is 76.2, which does not reflect the phenomenon of broken chain; it can effectively prevent slag sliding, material dropping and material sticking when the slope is large.

Technical parameters:

Parameter table of zwy-80 wheel scraper slag scraper
model ZWY-80T-4B-CDQG
Loading capacity m three /h ≤80
Total weight kg 4300±5%
Axle (bridge) distance mm one thousand five hundred and fifty
Rail (wheel) distance mm 1250/1220
Minimum turning radius m ≤5
Minimum ground clearance mm ≥190
Excavation width mm ≥3200
Excavation depth mm ≤540
Excavation height mm ≥2200
Excavation distance (from shovel opening) mm ≥1650
Unloading height mm More than 1700 can be customized
Unloading distance mm More than 1700 can be customized
Adapt to climbing gradient (°) ≤ 15 (hard ground)
Scraper chain speed M / min m/min
Scraper mechanism form Single chain drive
Total motor power kw thirty
Maximum material passing size mm 550×500
Travel speed motor / diesel engine M / S 0.65/0.39
Rated working pressure Mpa twelve
Opening pressure of safety valve MPa twelve point five
Electrical insulation Three phase m Ω >1.5
Phase to phase m Ω >1.5
Dimensions Length mm 5700±50
Width mm 1850±50
Height mm 1900±50
Applicable section M two 2.4×2.4

Key words: scraper scraper slag scraper inclined shaft slag raking machine price

Pressure sensor Mine slag scraper Rubber shock absorber Rubber joint Stamping robot electromagnetic flowmeter Pickling machine Temperature and humidity test chamber Spring shock absorber Rubber flexible connection Electric control valve V-type high efficiency mixer Fluorocarbon paint Flexible rubber joint Baoding Lange Spring shock absorber Metal hose Rubber flexible joint