珠海附近想过夜电话联系


National service hotline
seventeen billion eight hundred and seventy-one million one hundred and fifty thousand and eighteen

Tire type slag remover

You only need a phone call, we will provide the most suitable products, so that you spend the least money to achieve the best results

National service hotline
seventeen billion eight hundred and seventy-one million one hundred and fifty thousand and eighteen

Recommended products

Hotline:

seventeen billion eight hundred and seventy-one million one hundred and fifty thousand and eighteen

Email: 2334719176@qq.com

Address: Dengcheng Industrial Park, Dengcheng Avenue, high tech Zone, Xiangyang City, Hubei Province

Zwy-50t wheel slag scraper

  • Hotline: seventeen billion eight hundred and seventy-one million one hundred and fifty thousand and eighteen
  • product details

  • contact us

Main features:

1. Both sides of the bucket are changed from the original ordinary steel plate to wear-resistant steel plate, which increases the strength and service life.
2. The steel plate on the inner side of the front end of the conveyor frame extends to the gantry frame to ensure that the conveyor frame will not break under the limit conditions. The rear end of the conveyor frame is welded by the inner side of the angle iron to reinforce the rear end of the conveyor frame.
3. The quality of tubing is greatly improved from domestic brand to Sino Japanese joint venture brand, and the probability of tube burst and tube detachment is greatly reduced.
4. The electric drum manufacturer has replaced it. The drum arm of the former manufacturer will be cracked and the ring gear will be circled. The shell of the improved drum is thickened. The gears and gear rings are all quenched and tempered, and the strength is 1.5 times of the previous one after testing.
5. The chassis is upgraded from the original 16U steel to the inner 12mm steel plate, which ensures that the chassis has enough strength and thrust without deformation when the equipment is used for slag discharging and pushing in large roadway.
6. The roller support of conveyor frame is changed from opening to sealing, so the drum will not fall off.
7. The reinforced front and rear frames have passed 200000 fatigue strengthening tests, which have strong bearing capacity, reasonable load distribution and good stability.
8. The optimized design of working device has the advantages of large digging force, large lifting force and high full load coefficient, which can better adapt to the narrow and low working conditions.

Product parameters:


Technical parameters of zwy1.2-50t wheel slag remover
model ZWY-50/11T
Sports project Company parameter
Loading capacity m three /h ≥50
Overall quality kg (about) 2500 ± 5%
Wheelbase (a) mm one thousand and five hundred
Track width (front / rear) mm one thousand one hundred and twenty
Minimum turning radius m ≥5
Excavation width (b) mm two thousand and two hundred
Excavation distance (c) mm one thousand and six hundred
Loading width (z) mm seven hundred and fifty
Excavation height (H) mm one thousand six hundred and fifty
Height of the highest unloading position (H) mm 1250 (heightening)
Loading length (d) mm 1100 (extendable)
Climbing ability ° ≤6
Maximum material carrying capacity mm ≤450×300
Belt speed m/s 0.8±5%
Conveying capacity m three /h ≥50
Main motor power Kw eleven
Total power Kw fifteen
Walking speed Km/h 1.3±5%
Rated working pressure Mpa twelve
Opening pressure of safety valve   Mpa twelve point five
Electrical insulation strength three-phase >1.5
Alternate >1.5
Maximum dimension of transportation state Length mm   4900±50
Width mm   1200±50
Height mm   1350±50
Minimum applicable section M two   1.8×1.8

Key words: wheel type slag raking machine | 50 slag raking machine | roadway slag raking machine

Pressure sensor Mine slag scraper Rubber shock absorber Rubber joint Stamping robot electromagnetic flowmeter Pickling machine Temperature and humidity test chamber Spring shock absorber Rubber flexible connection Electric control valve V-type high efficiency mixer Fluorocarbon paint Flexible rubber joint Baoding Lange Spring shock absorber Metal hose Rubber flexible joint