珠海附近想过夜电话联系


National service hotline
seventeen billion eight hundred and seventy-one million one hundred and fifty thousand and eighteen

Tire type slag remover

You only need a phone call, we will provide the most suitable products, so that you spend the least money to achieve the best results

National service hotline
seventeen billion eight hundred and seventy-one million one hundred and fifty thousand and eighteen

Recommended products

Hotline:

seventeen billion eight hundred and seventy-one million one hundred and fifty thousand and eighteen

Email: 2334719176@qq.com

Address: Dengcheng Industrial Park, Dengcheng Avenue, high tech Zone, Xiangyang City, Hubei Province

Zwy-70t wheel slag scraper

  • Hotline: seventeen billion eight hundred and seventy-one million one hundred and fifty thousand and eighteen
  • product details

  • contact us

Main features:

1. The front end of the conveyor frame is supported by three rows of square tubes, and the strength of the square tubes is three times as much as that of the triangle iron, and the bending deformation of the support frame will not occur even if the large stones are transported through the material outlet
2. The inner side of the rear part of the conveyor frame is supported by angle iron, which not only ensures the sufficient strength of the tail of the conveyor frame, but also better protects the cable of the conveying drum from friction and extrusion by the conveyor belt and stones;
3. The pin shaft of the big and small arms adopts the same structure as that of the large excavator. The bearing area of the pin shaft is larger and the overall stress is uniform. Under the condition of normal buttering, the pin shaft will not be short-term broken, and the bushing of the arm and arm will be worn, loose and cracked;
4. The side plates on both sides of the bucket before improvement are ordinary steel plates. When the stones are hard, the side plates are severely worn or even cracked. The front end of the improved side plates is made of high-strength wear-resistant plates. When the stones are hard, the side plates will not wear and crack quickly, which greatly improves the service life of the bucket;


Technical parameters:

ZWY-70T Parameters of wheel belt slag remover
project Company parameter
Loading capacity m three /h ≤70
Overall quality kg 3100±5%
Axle (bridge) distance mm one thousand five hundred and fifty
Rail (wheel) distance mm 1250/1220
Minimum turning radius m ≤5
Minimum ground clearance mm ≥190
Excavation width mm ≥3000
Excavation depth mm ≤550
Excavation height mm ≥2000
Excavation distance (from shovel opening) mm ≥1600
Unloading height mm More than 1500 can be customized
Unloading distance mm More than 1600 can be customized
Adapt to climbing gradient (°)) ≤ 15 (hard ground)
Belt speed m/s 0.8±5%
Total power of motor Kw 15+5.5
Main motor power Kw fifteen
Electric drum power Kw five point five
Walking speed m/s 0.65/0.39
Rated working pressure Mpa twelve
Opening pressure of safety valve Mpa twelve point five
Electrical insulation Ω >1.5
Ω >1.5
Dimensions mm 5500±50
mm 1500±50
mm 1500±50
Applicable section m two 2.2×2.2

Key words: 70 slag raking machine tire type slag raking machine mine slag raking machine

Pressure sensor Mine slag scraper Rubber shock absorber Rubber joint Stamping robot electromagnetic flowmeter Pickling machine Temperature and humidity test chamber Spring shock absorber Rubber flexible connection Electric control valve V-type high efficiency mixer Fluorocarbon paint Flexible rubber joint Baoding Lange Spring shock absorber Metal hose Rubber flexible joint