珠海附近想过夜电话联系


National service hotline
seventeen billion eight hundred and seventy-one million one hundred and fifty thousand and eighteen

Tire type slag remover

You only need a phone call, we will provide the most suitable products, so that you spend the least money to achieve the best results

National service hotline
seventeen billion eight hundred and seventy-one million one hundred and fifty thousand and eighteen

Recommended products

Hotline:

seventeen billion eight hundred and seventy-one million one hundred and fifty thousand and eighteen

Email: 2334719176@qq.com

Address: Dengcheng Industrial Park, Dengcheng Avenue, high tech Zone, Xiangyang City, Hubei Province

Zwy-80t wheel slag scraper

  • Hotline: seventeen billion eight hundred and seventy-one million one hundred and fifty thousand and eighteen
  • product details

  • contact us

Main features:

1. Both sides of the bucket are changed from the original ordinary steel plate to wear-resistant steel plate, which increases the strength and service life.
2. The pin shaft of the big arm and the small arm is fixed by the pin bushing instead of the original 4-square locking plate, so the force is more uniform and the replacement is easier, and the wear resistance is improved
3. The center shaft of the bull head was fixed by three screws before, which was easy to rust and loose, but the improved one is not easy to loose by the pin. Moreover, the bracket base is equipped with a 10 mm thick gasket, which is more compact and wear-resistant.
4. The electric drum manufacturer has replaced it. The drum arm of the former manufacturer will be cracked and the ring gear will be circled. The shell of the improved drum is thickened. The gears and gear rings are all quenched and tempered, and the strength is 1.5 times of the previous one after testing.


Technical parameters:

Parameter table of zwy-80t wheel belt slag scraper
model ZWY-80T-4B-CDQ
Loading capacity m three /h ≤80
Total weight kg 3150±5%
Axle (bridge) distance mm one thousand five hundred and fifty
Rail (wheel) distance mm 1530/1470
Minimum turning radius m ≤5
Minimum ground clearance mm ≥190
Excavation width mm ≥3200
Excavation depth mm ≤540
Excavation height mm ≥2200
Excavation distance (from shovel opening) mm ≥1650
Unloading height mm More than 1700 can be customized
Unloading distance mm More than 1700 can be customized
Adapt to climbing gradient (°) ≤ 15 (hard ground)
Belt speed M / S 0.8±5%
Total motor power kw 15+5.5
Main motor power kw fifteen
Electric drum power kw five point five
Fan power kw -
Travel speed motor / diesel engine M / S 0.65/0.39
Rated working pressure Mpa twelve
Opening pressure of safety valve MPa twelve point five
Electrical insulation Three phase m Ω >1.5
Phase to phase m Ω >1.5
Dimensions Length mm 6000±50
Width mm 1750±50
Height mm 1800±50
Applicable section M two 2.4×2.4

Key words: wheel type slag raking machine tunnel slag raking machine underground slag raking machine

Pressure sensor Mine slag scraper Rubber shock absorber Rubber joint Stamping robot electromagnetic flowmeter Pickling machine Temperature and humidity test chamber Spring shock absorber Rubber flexible connection Electric control valve V-type high efficiency mixer Fluorocarbon paint Flexible rubber joint Baoding Lange Spring shock absorber Metal hose Rubber flexible joint