珠海附近想过夜电话联系


National service hotline
seventeen billion eight hundred and seventy-one million one hundred and fifty thousand and eighteen
Current location: homepage > Information Center > Industry trends >

Maintenance of the four major slag rakers

Article source: admin popularity: Time of publication: June 3, 2020 11:29

   For how to prolong the service life of slag raking machine, the simplest and effective method is to operate correctly and safely, repair and maintain on time in case of any fault.
                                                          
The following are the six forbidden operations of slag raking machine, which operators often ignore?
1. When using the slag raking machine, no one is allowed to go up or down the slag raking machine or leave temporarily, which is a very dangerous action.
2. It is strictly forbidden to adjust the pressure of the safety valve without permission to avoid damaging the hydraulic components or affecting the performance.
3. It is forbidden to use the bucket to smash solid objects; in case of large stones or hard objects, hydraulic breaking hammer can be installed, which has large impact force and high crushing efficiency.
4. It is forbidden to change the wiring mode of the motor. The gear pump motor is a special motor.
5. During non working hours, it is forbidden to place the bucket in the air when the slag raking machine is parked.
6. During the operation or commissioning of slag raking machine, it is forbidden to stand within two meters in front of the bucket and vehicle, and it is forbidden to touch the power transmission part.
The four basic operations of slag raking machine maintenance can reduce the occurrence of machine failure.
                                                                                                       
1. Regularly clean the gas components of the slag raking machine that are easy to block (radiator, filter, distributor safety valve, multi-channel valve stuck, oil tank outlet filter screen).
2. Regularly check whether the sealing ring and oil pipe joint are loose or worn, and replace or repair them.
3. Change the hydraulic oil and gear oil regularly. It is recommended to use the anti-wear hydraulic oil of the same brand and model conforming to the national standard.
4. Regular maintenance and replacement of filter element. The filter element plays the role of filtering impurities in oil or gas path to prevent impurities from invading parts and causing faults; the filter element suitable for the machine should be used.

Keywords: Six prohibitions of slag raking machine, slag raking machine maintenance, slag raking machine manufacturer, wheel

Ranking of similar articles

Latest news articles

Pressure sensor Mine slag scraper Rubber shock absorber Rubber joint Stamping robot electromagnetic flowmeter Pickling machine Temperature and humidity test chamber Spring shock absorber Rubber flexible connection Electric control valve V-type high efficiency mixer Fluorocarbon paint Flexible rubber joint Baoding Lange Spring shock absorber Metal hose Rubber flexible joint